It is suitable for cement reinforcement grouting and repair engineering

Supplementary Instruction to WHDF-GJ Construction:

1.After the grouting method is confirmed according to the actual requirements, carry out field test to determine the grouting pressure.

2.Grout the concrete according to the water cement ratio determined by the slurry test or approved by the supervisor, the concrete should be gradually changed from thin to thick.

3.The standard for the final grouting is determined according to the grouting method.

4.After the grouting of the hole is completed, the construction unit shall conduct acceptance inspection together with the supervisor, and seal the hole after the acceptance is completed. Before sealing, the slurry and dirt in the hole should be removed to make the whole hole packed tightly.

This product is non-toxic,non-flammable,non-explosive and non-volatile. Store at room temperature and room pressure in the warehouse; There are no special requirements for the transportation; It is valid for one year.

Shake the product well before use; Do not mix the WHDF-GJ stock solution directly with water reducer or other admixtures.